AC PERFORMANCE high Performance (8113) RC-NX14 Professional Spark Plug Wire Set Replacement for Nissan 1996-2004 / Infiniti 1997-2000, 450ohms/foot

Tips: Check the spark plug wires when checking or replacing your vehicle's spark plugs. Look for any cracks or tears in the insulation and the wire connections to make sure they are secure.Terminal Installation: Step 1: Align the terminal and pull the wire from the back of the connector in order to seat the terminal. Step 2: If necessary, cut the new wire to proper length and splice with existing circuit. Step 3: If the connector is outside of the passenger compartment, apply dielectric grease to the connector. Step 4: Install the TPA, CPA and/or the secondary locks.FAQ: ▲Should I change my spark plug wires when I change my spark plugs? ▶Spark plug wires should be changed as recommended in your vehicle owner's manual. ▲Is the length of the wire or cable important for installation or performance? ▶Yes, the length of the wire or cable is important for fit and performance. You should only use the wire or cable that is designed to meet the original equipment fit, form, and function.Troubleshooting: Signs that you may be having problems with your spark plug wires or that your spark plug wires might need to be replaced are: Engine cylinder misfires. This can be due to conductor wear. Sluggish vehicle performance or reduced engine power, especially when going up hills or under a load. Rough engine idle, engine hesitation, engine surging caused by a disruption of the normal electrical current flow. Breaks or cracks in the insulation jacket or outer coating of the wires.

• Set includes 6 wires (Coil Lead N/R), 8mm wire, 450ohms/foot
• Wire wound ignition cable with OEM or better specified spark plug and distributor boots.
• Variable pitch winding delivers ultra-low resistance, a powerful spark and outstanding EMI/RFI noise suppression
• Positive-locking terminal ends for tight fit and maximum resistance to vibration and separation
• High-temp silicone outer jacket resists moisture, oil/petrol and cracking due to temperature extremes
• High density, premium fiberglass braiding reinforcement over EPDM / silicone inner insulation for superior dielectric strength and excellent cable tensile strength.
• These wire sets are built to meet stringent OEM tolerances for a variety of vehicles. They utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs.
• Applicable Models: As shown in the second picture (Please check carefully Compatibility chart above to make sure your vehicle is listed before you purchase)
• Warranty: 2 Years / 50000 KM